Oki MICROLINE MX Series User Manual page 189

Change Case
Specifies the font as Mono or Dual case. This option is available
only in non-SCS mode. The host will be notified of the change when
the printer is placed online. Mono Case prints the same as Dual
Case if the character set is one of the following "right to left" sets:
Katak., Hebrew, Old Hebrew, and Farsi.
SCS (System Network Architecture Character String) mode is
controlled by the host computer.
•
Dual Case (default)
•
Mono Case
Set Text Orientn
Specifies the direction in which characters are printed on the page.
This allows the printer to print languages which are printed right to
left instead of left to right.
•
Left to Right (default).
•
Right to Left. When a right to left language is selected, the
host will be notified of print direction changes when the printer
is put online.
Intervention Req
Select from the following:
•
Not Send To Host
•
Send To Host (default). The printer sends a signal to the host
computer when any of the following occur:
•
Printer faults occur.
•
Hold mode time–out occurs.
If not selected, the printer will only send the signal on printer faults
that cause data loss (paper jam, ribbon stall, online platen open,
etc.).
3270 Params
189