P-Series Emulation (With Lg) - Oki MICROLINE MX Series User Manual

P-Series Emulation (with LG)

Printer
Protocol
(from page 207)
P-Series
Control Code Control Code
06 08
8.0 LPI*
Elongated*
10.3 LPI Backspace
6.0 LPI
P-Series
EVFU Select
SFCC
1*
Enable*
(0-7F hex) Disable
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK).
You can select an alternate line spacing of 6, 8, or 10.3 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code hex 08 (BS).
You can define the code to output the following character:
•
Elongated (default).
•
Backspace.
Define CR Auto LF
Code
CR = CR* Disable*
CR = CR + LF Enable
Alt. Set Character
80-9F Set
Control Code* (see page 225)
Printable
P-Series Emulation (with LG)
* = Factory Default
Overstrike Define LF
Code
Enable* LF = CR + LF*
Disable LF = LF
SFCC d
Command
Even dot plot*
Double high
219