Oki MICROLINE MX Series User Manual page 271

CR
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
= CR (default). Does not insert an extra line feed after each
carriage return.
•
= CR + LF. If this feature is enabled, each time the printer
receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. (Do not use this feature if
the host computer sends Line Feeds to the printer with each
Carriage Return.)
LF
This parameter forces the printer to insert an automatic Carriage
Return code into the data stream whenever a Line Feed code
occurs. This can be used in most installations, but it is required if
the host computer does not send carriage returns to the printer.
•
= LF (default). Does not perform an automatic carriage return.
The next print position will be the current print position of the
next line.
•
= CR + LF. Each time the printer receives a Line Feed, it
inserts an additional Carriage Return code (hex 0D) into the
data stream. This feature can be used in most installations, but
it is required if the host computer does not send Carriage
Returns to the printer.
LG Emulation
Epson FX Emulation
271