Wlan Leap - Oki MICROLINE MX Series User Manual

Renew Lifetime
Sets the maximum allowable amount of time in Seconds, Minutes,
Hours, or Days before warning that a new Kerberos password is
needed.
•
Seconds. The range is 0-604800, and the default is 0.
•
Minutes. The range is 0-10080, and the default is 0.
•
Hours. The range is 1-168, and the default is 0.
•
Days. The range is 0-7, and the default is 0.
•
Renew Lifetime Units. Renew lifetime unit in seconds. The
default is 0.

WLAN LEAP

WLAN
2
LEAP
(from page 106)
Auth Method LEAP
Username
Open* LEAP Username (01-15)
Shared LEAP Username (16-30)
1
LEAP Username (31-32)
Kerberos
2
LEAP
Auth Method
This feature allows the user to select the authentication method
used for the wireless network interface.
•
Open (the default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a
Symbol RF card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco RF
card installed).
* = Factory Default
1 = Only if a Symbol radio card is installed.
2 = Only if a Cisco radio card is installed.
Reset LEAP LEAP
User Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
WLAN LEAP
Reset LEAP
Password
121