Oki MICROLINE MX Series User Manual page 75

Active IGP Emulation
The Active Emulation menu enables you to activate either the PGL
or VGL emulation.
PGL SFCC
You can specify which hex code (1-FF) will be used as the Special
Function Control Character (SFCC). The SFCC denotes that the
following data is an IGP command.
•
7E (the default)
•
1 – FF
VGL SFCC
You can specify which hex code (1-FF) will be used as the Special
Function Control Character (SFCC). The SFCC denotes that the
following data is an IGP command.
•
5E (the default)
•
1 – FF
Printer Protocol
Select the LinePrinter+ protocol you wish to use. Refer to the
LinePrinter Plus Programmer's Reference Manual for more
information.
Form Length
Form length is the number of lines that can be printed on a page.
You can set the form length in inches, millimeters (mm), or as a
function of the current lpi (lines per inch).
Form Width
The form width can be specified in inches, millimeters, or as a
function of the current cpi (characters per inch). The forms width set
should not exceed the actual paper width.
QUICK SETUP
Optimizing Print Speed
75