Oki MICROLINE MX Series User Manual page 174

Chapter 4
Coax/Twinax (CTHI) Emulation
Position Aft FF (4234 only)
Allows you to select the location of the print position after a form
feed command is sent.
•
•
Last Char = FF
Determines the print line position when a form feed command is the
last code encountered in the print buffer.
•
•
NOTE: This option is ignored if Auto Skip At End is on.
If configured as a 3287, and a form feed occurs in the middle of a
print buffer, the printer defaults to the first print position on the
second line of the next form regardless of the setting of this option.
Null Suppression
•
•
FF Validity
Determines if the position of a form feed command affects its
execution.
•
•
174
On (default). Sets the printer to print at print position 1 of the
first print line on the next form.
Off. Sets the printer to print at print position 2 of the first print
line on the next form.
On (default). Moves to the first print position on the second line
of the next form.
Off. Moves to the first print position on the first line of the next
form.
Off (default). Ignores nulls. The print position does not move.
On. Treats nulls as blank spaces.
Off (default). Performs a form feed only if it occurs at the first
print position in a line or at Maximum Print Position +1. A form
feed command at any other position is recognized as a space.
On. Allows the printer to perform a form feed command
anywhere in the data stream.