Oki MICROLINE MX Series User Manual page 220

Chapter 4
LinePrinter Plus Emulation (with PCL-II)
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a carriage return,
it inserts an additional Line Feed code (hex 0A) into the data
stream. Do not use this feature if the host computer sends Line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return. The next print position will be print position 1 of the next
line.
Auto LF
This option defines the printer action when print data is received
past the forms width setting.
•
Disable (default). Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width, causing the excess
text to print on the next line.
Overstrike
This option enables you to print bold characters.
•
Enable (disable). Turns on bold print. When enabled,
overstrike printing slows down the printer.
•
Disable. Turns off bold print.
Define LF Code
•
LF = CR + LF (default). Forces an automatic carriage return
with each line feed command. The next print position is print
position 1 of the next line.
•
LF = LF. Does not perform an automatic carriage return. The
next print position will be the current print position of the next
line.
220