Diagnostics - Oki MICROLINE MX Series User Manual

Ink Saver Mode
The overall image density setting will be maintained at a lower
level, equivalent to approximately 0.2 PCS below the default
setting. The factory default setting is Disable. Select Enable and
press the ENTER key to activate the Ink Saver Mode.

DIAGNOSTICS

DIAGNOSTICS
(from page 68)
Printer
Tests
Shift Recycle* Burnin Test
All E's Print Error Log
E's + TOF Print Ribbon Log
All H's Clear Error Log
All Underlines Adapter Test
All Black Ethernet Test
2
Shuttle Slow Acoustic
Shuttle Fast Demo
Shuttle Only Dice Five
Phase Printer
Paperout Adj.
DRAM Flash
Avail. Avail.
20722480 4973757
Bytes Bytes
Test Width
Set this parameter to run the self-tests at full width or 80 columns.
Test Width Paper Out
Dots
Full Width* 40 dots*
3
80 col. (4-76)
3
1
DIAGNOSTICS
Epson FX Emulation
* = Factory Default
1
If Ethernet adapter is present
2
Not available in PCL-II or LG
3
Not available in LG
System Print
Memory Statistics
32 On: 144.9 Hrs.
Megabytes Print: 8.3 Hrs
Print Strokes:
233441
Print Lines:
28250
11 inch Pages:
614
287