Auto Uppercase; Skip Cmd Prefix; Forms Handling - Oki MICROLINE MX Series User Manual

Select LPI
This is the number of lines to be printed per inch. For example, at 6
lpi there is 1/6 inch from the top of one print line to the top of the
next print line. The options are:
•
6.0 (default)
•
8.0
•
9.0
•
10.0

Auto Uppercase

This parameter enables the printer to print text in all uppercase
when using the ALPHA command.
•
Disable (default). The printer will print text in upper and
lowercase.
•
Enable. The printer will print text in uppercase only.

Skip Cmd Prefix

This parameter determines if the printer will print any data before a
PGL command is received.
•
Enable (default). The printer ignores all data on the current line
before an IGP command.
•
Disable. The printer will print all data on the current line before
an IGP command.

Forms Handling

This submenu allows the user to handle the form in the following
ways:
•
Disable (the default). No effect.
•
Auto Eject. Automatically ejects a page at the end of the job to
spill out the last page.
•
Auto TOF. Automatically does a form feed (FF) at the end of
each form to the next top of form.
IGP/PGL Submenu
IGP/PGL Submenu (with LG)
133