Oki MICROLINE MX Series User Manual page 323

Table 15. LCD Message Troubleshooting Table
Can User
Displayed Message
Correct?
CLEAR PAPER JAM Yes
CLEARING No
PROGRAM FROM
FLASH
CLOSE PLATEN Yes
COIL HOT No
CTL VOLT FAIL* No
DIAGNOSTIC No
PASSED
Explanation
No paper motion. Clear jam and reload
paper. If this message
recurs, contact your
authorized service
representative.
Status message: No action is required.
emulation software
successfully
loaded into printer
RAM and the
checksum
matched. The old
program is now
being deleted from
flash memory.
The platen lever is Close the platen lever.
open.
One or more Contact your authorized
hammer coils are
service representative.
overheating.
Controller voltage Contact your authorized
failure.
service representative.
Status message: No action is required.
the printer passed
its memory and
hardware
initialization tests.
Fault Messages
Solution
1
1
1
323