Technics SX-F100 Owner's Manual page 86

Part Ill
• If the part assigned to the upper source track
("upper" meaning its position on the TRACK
MERGE display) is different from the part as-
signed to the lower source track, when the
parts are merged in the destination track , the
new track is assigned the same part as the
upper track.
2. Select the dest ination track (right half of the
display) .
• Press the button on the right side of the display
to select the dest ination track, and use the
TRACK
A
and v buttons to specify the track
number.
QUANTIZE
The QUANTIZE function can correct the timing
of your performance after it has been recorded .
If the rhythm is slightly out of sync or inexact, it
will automatically be corrected to the specified
quantize level.
Rhythm as written
in the score . . . ..
·· ·~ ~_J_
'
.
.
'
.
.
Timing of actual
! :
performance . . . . . . .
·t----:--- : _ _ . , _ . _ _ _ . __
Quantized per- : : .
formance (}level) . .. .
~-·--#----..---
oumn
I2E
TRACK
: 12
LAST MEASURE : 139
OUAHTIZE VALUE :
J
-- ---· --
·- --- - -
- - - -
- - - - -
84
Sequencer
3. Press the OK button .
• The confirmation display appears . Press the
YES button to execute the function, or press
the NO button to cancel the function .
1.
Select TRACK . Use the
1\
and v buttons to
specify the track number.
• This function does not work for the CONTROL ,
RHYTHM and CHORD tracks.
• If ALL is selected, all the tracks are quantized .
2. Select FIRST MEASURE . Use the
1\
and v
buttons to specify the start point (measure
number).
3 . Select LAST MEASURE . Use the
A
and v
buttons to specify the end point (measure
number) .
4. Select QUANTIZE VALUE . Use the
A
and v .
buttons to specify the quantize leve l.
• Select from
h .•
~
. •
~3, ~~.
h . .
~ .
J.
(A 3 denotes
a triplet-type note .)
5. Press the OK button .
• The confirmation display appears . Press the
YES button to execute the function, or press
the NO button to cancel the function .
- - - -- -- -- --- --