Technics SX-F100 Owner's Manual page 110

Part V
• FILE delete
To erase a song from a disk, on the FILE
NAMING display, press the FILE DELETE but·
ton . Then on the FILE SELECTION display ,
select the number of the song you wish to erase,
and press the DEL button . The display changes
to the confirmation display . Press the YES button
to erase the song , or press the NO button to can·
eel the procedure .
MIDI FILE SAVE
Th e data from this instrument 's SEQUENCER
can be saved in the Standard MIDI File format.
• What you can save in the Standard MIDI File
format is ordinary performance data, such as
note data. Data which is specific to Technics
instruments (such as SEQUENCER data for
the chord and rhythm parts , COMPOSER data,
PANEL MEMORY data, etc .) is not saved. If
you wish to also save the special Technics
data, firs t use the DISK SAVE procedure to
save the data to a disk , and then follow the
MIDI FILE SAVE below .
1. On the DISK DRIVE menu display, select MIDI
FILE SAVE .
• The display changes to the FILE NAMING
display.
2. Type a name for the new data fi le (up to 8
characters) .
• Use the POSITION buttons to highlight the
character position in the name box . Use the
ABC .. 789 buttons to select the alphanumeric
character . Repeat these steps to type the
whole name.
• To erase the name, press the CLR button .
- --- -- - - - -
108
Disk Drive
3. Press the SAVE button .
• The display looks similar to the following .
MIDI FILE SAVE : FILE SELECTION <200)
1•1 DI;J:!g•ll•!o!otliii•J
02: ABC02000. HIO
03: ABC03000.HIO
04:
05:
OS:
07:
08:
09 :
10:
•I
PANEL HEADER OFF
•I
ONE MEASURE SPACE: OFF
4. Use the
1\
and
v
buttons to select the name
of the file in which to save the data .
• To save in a new file , select a blank line .
5. Press the SAVE button.
• When the operation has been successfully
completed , "COMPLETED! '' is shown on the
display.
• If you attempt to save data to a file name in
which data is currently saved, the display
changes to the confirmation display . Press the
NO button if you wish to cancel the procedure.
When the YES button is pressed , the MIDI
FILE SAVE operation begins .
• PANEL HEADER
You can save the sound, volume and other set·
lings for each part as data at the beginn ing of
the file . Select YES to save the data, or NO if
you do not wish to have the data saved at the
file beginning .
-
--- - - -- -- - -
-