Technics SX-F100 Owner's Manual page 4

Important Salety Instructions
WARNING
When using electric products , basic precautions
should always be followed , including the following ;
• Read all the instructions before using the
product.
Safety
• Power Source-The product should be con -
nected to a power supply on ly of the type
described in the operating instructions or as
ma rked on the product.
• Polarization-Th is product may be equipped
with a polarized line plug( one blade wider than
the other} . This is a safety feature . If you are
unable to insert the plug into the outlet , contact
an electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug .
• Periods of Non-use-The power-supply cord
of the product should be unplugged from the
outlet when left unused for a long period of
time.
Installation
• Water and Moisture-Do not use th is product
near water-for example, near a bath-
tub ,washbowl , kitchen sink, in a wet base-
ment , or near a swimming pool , or the like .
• Cart/Stand-Th is product should be used
only with a cart or stand that is recommended
by the manufacturer.
• Ventilation-The product should be located
so that its locat ion or position does not inter-
fere with its proper ventilation .
• Heat-The product should be located away
from heat sources such as radiators , heat
registers , or other products that produce heat.
• Foreign Material-Care should be taken so
that objects do not fall and liquids are not
spilled into the enclosure through openings .
Listening caution
This product, either alone or in combination with
an amplifier and headphones or speakers may
be capable of producing sound levels that could
cause permanent hearing loss . Do not operate
for a long period of time at a high volume level
or at a level that is uncomfortable . If you ex-
perience any hearing loss or ringing in the ears ,
you should consult an audiologist.
Service
• Damage Requiring Service- The product
should be serviced by qualified service per-
sonnel when :
a . The power-supply cord or the plug has
been damaged ; or
b. Objects have fallen , or liquid has been
spilled onto the product; or
c. The product has been exposed to rain ; or
d. The product does not appear to operate
normally or exhibits a marked change in
performance; or
e. The product has been dropped , or the
enclosure damaged.
• Servicing- Do not attempt to service the
product beyond that described in the user-
maintenance instructions .
All other servicing should be referred to
qualified se rvice personnel.
Maintenance
• Be sure to switch this unit off after use, and
do not switch the unit on and off in quick
succession , as this places an undue load on
the electronic components .
• To maintain the luster of the keys and buttons ,
wipe with a clean , damp cloth , and pol ish with
a soft , dry cloth . Polish may be used , but do ·
not use thinners or petro-chemical-based
polishes .
• A wax-based polish may be used on the
cab inet , although you will find that rubbing with
a soft cloth will suffice.
SAVE THESE INSTRUCTIONS
2