Technics SX-F100 Owner's Manual page 129

Part VII
OUTPUT SETTING
The output settings for the ORGAN part, the
BASS part and the DRUMS part can be adjusted.
1. On the MEM
&
CTRL menu display , select
OUTPUT SETTING.
• The display looks similar to the following .
2. Use the PART
1\
and
v
buttons to select the
part (U/L ORGAN , DRUMS or BASS).
3. Use the EXP. PEDAL
1\
and v buttons to
specify whether the expression pedal opera-
tion is effective for the sounds output from the
SEPARATED LINE OUT terminals .
ON : The sounds output from the SEPARATED
LINE OUT terminals are affected by the ex-
pression pedal operation .
OFF : The sounds are not affected.
127
Adjusting the functions
4. Use the LINE OUT
1\
and v buttons to select
the output mode for the part .
ON : The signals are output from the LINE
OUT
terminals.
OFF: The signals are not output from the LINE
OUT terminals.
5. Use the INT.SP
1\
and v buttons to specify
whether the sound of the part is output from
this instrument's speakers.
ON : The sound of the part is output from this
instrument's speakers .
OFF : The sound of the part is
not
output from
this instrument's speakers .
• When the power to this instrument is turned
on, this setting is automatically switched to
ON for all parts .
6. Repeat steps 2 to 5 for each part as desired .
• For detailed information concerning the output
terminals, refer to page 155.