Installing Eu Decals; Product Overview; Controls - Toro 04530 Operator's Manual

9

Installing EU Decals

Parts needed for this procedure:
1 Warning decal 117-9537
Procedure
If this machine will be used in the EU, affix the warning
decal 117-9537 over warning decal 117-9536.

Product Overview

4
2
3
1
g014674
1. Engine
2. Roll bar
3. Control panel
4. Seat

Controls

Traction Pedal
The traction pedal (Figure 17) has three functions: to
make the machine move forward, to move it backward,
and to stop the machine. Press the top of the pedal to
move forward and the bottom of the pedal to move
backward or to assist in stopping when moving forward.
Also, allow the pedal to move to the neutral position to
stop the machine. For operator comfort, do not rest the
heel of your foot on reverse when operating forward
(Figure 18).
19
5
6
7
Figure 16
5. Steering wheel
6. Traction pedal
7. Foot rest
8. Cutting units
8