Installing Eu Decals; Product Overview; Controls - Toro 04530 Operator's Manual

9

Installing EU Decals

Parts needed for this procedure:
1 Warning decal 121–2640
Procedure
If this machine will be used in the EU, affix the warning decal
121–2640 over warning decal 121–2641.

Product Overview

4
2
3
1
g014674
1. Engine
2. Roll bar
3. Control panel
4. Seat

Controls

Traction Pedal
The traction pedal (Figure 17) has three functions: to make
the machine move forward, to move it backward, and to stop
the machine. Press the top of the pedal to move forward
and the bottom of the pedal to move backward or to assist
in stopping when moving forward. Also, allow the pedal
to move to the Neutral position to stop the machine. For
operator comfort, do not rest the heel of your foot on reverse
when operating forward (Figure 18).
18
5
6
7
Figure 16
5. Steering wheel
6. Traction pedal
7. Foot rest
8. Cutting units
8