Ignition Switch; Engine Oil Pressure Light; Hour Meter; Backlap Switch - Toro 04530 Operator's Manual

Ignition Switch

Insert the key into the switch (Figure 19) and turn it
clockwise as far as possible to the Start position to start
the engine. Release the key as soon as the engine starts;
the key will move to the On position. Turn the key
counterclockwise to the Off position to stop the engine.

Engine Oil Pressure Light

The light (Figure 19) glows if the engine oil pressure
drops below a safe level.
Service Indicator Light
The service indicator light (Figure 19) illuminates
when the machine sensors detect an issue with one of
the systems of the machine. If this light illuminates,
stop what you are doing and drive to a safe location
where you or a service technician can diagnose
the problem. For more information on diagnosing
system issues using the service indicator light, refer to
Diagnosing the Service Indicator Light (page 43).

Hour Meter

The hour meter (Figure 20) indicates the total hours the
machine has operated. It starts to function whenever the
key switch is rotated to On.
g014600
Figure 20
1. Hour meter
Parking Brake Lever
Pull up on the brake lever (Figure 21) to set the parking
brake. Disengage it by pushing it forward and down. Set
the parking brake any time you leave the machine.

Backlap Switch

The backlap switch is located under the plastic cover to
the left of the seat. Use the backlap switch (Figure 22) in
conjunction with the raise/lower mow control lever and
the reel speed control for backlapping the reels.
1. Backlap switch—backlap
position
1
Reel Speed Control
The reel speed control is located under the plastic
cover to the left of the seat. Use the reel speed control
(Figure 23) to adjust the RPM of the reels.
21
Figure 21
Figure 22
2. Backlap switch—mow
position
g01461 0