Deleting Files - Omron NT-series Operation Manual

Deleting Files

4-2

Deleting Files

1, 2, 3... 1.
8. When copying is complete, a message will be displayed. Press any key
to return to the File Selection Display.
Note If you give the new file the same name as an existing file, a message will ap-
pear indicating that the file name already exists, and asking you if you wish to
overwrite the existing file. If it is overwritten, any data stored up to that point
will be cleared. If you wish to overwrite the existing file, press the Enter Key.
If you wish to cancel, return to step 6. by pressing a key other than the Enter
Key. Then input another name for the new file.
You can delete all the contents of a designated file (i.e., screen data, memory
table data, and mark data).
Go to the File Selection Display.
2. Move the bar cursor to the file which is to be deleted, and press F2 (De-
lete). A message will appear asking whether you actually want to delete
the file.
3. To confirm, press the Enter Key. Press any other key to return to the File
Selection Display.
4. When the deletion is complete, a message will be displayed. Press any
key to return to the File Selection Display.
Section 4-2
97