Transmitting Data
6-1
Connecting to the PT
6-2
Transmitting Data
106
Before beginning transfer operations, connect the computer to the Program-
mable Terminal according to the system configuration shown below.
IBM PC/AT
5.25" floppy disk
3.5" floppy disk
Note For instructions on the proper connecting cable, refer to the appropriate Pro-
grammable Terminal operation manual.
Data created with the Support Tool (i.e., screen data, memory table data, and
mark data) can be transmitted either by file or by screen (i.e., single screens,
multiple screens, or memory tables).
RS-232C
100 to 240 VAC
50 Hz/ 60 Hz
Section 6-2
24-VDC power supply