Character String Displays - Omron NT-series Operation Manual

Character String Displays

Deleting and Modifying
2-3

Character String Displays

34
Number of integer
digits (Integer)
Number of decimal
digits (Decimal)
Zero suppress (Zero
Sup)
Display sign (Disp
Sign)
Character size (Char
Size)
Scale
Attributes
Display type (Disp
Type)
Press the Enter Key after completing all of these settings.
8. Set the display position. When the display position has been set, you
can return to set another numeral display or you can continue pressing
the Escape Key to return to the Initial Edit Display.
Direct connection numeral displays are deleted or modified from the display
shown in step 1. above. Select the number of the numeral table and then
specify DELETE or MODIFY. The modification procedure is basically the
same as the creation procedure given above.
The contents of character string tables can be displayed on the screen. The
string table entry to be referenced, the display position, and manner of dis-
play must be set.
You can set a maximum of 8 string displays per screen for the NT20M and 50
for the NT600M.For the NT20M, string table entries are numbered from 0 to
31, for a total of 32. For the NT600M, string table entries are numbered from
0 to 255, for a total of 256.
The procedure for setting number displays depends on whether or not direct
connection is ON or OFF in the Tool Settings. Both procedures are given be-
low.
Set the number of digits for the integer portion of the
number.
Set the number of digits for the decimal portion of the
number.
Set whether or not leading zeros are to be displayed on
the screen.
Set whether or not negative signs are to be displayed on
the screen. The positive sign is not displayed.
Set the size of characters to be displayed on the screen.
Set the scale factor for the display. The NT600M can be
set to 64X in addition to those shown above.
Sets display attributes for the screen. Refer to page 24
for examples of how attributes are displayed on screen.
Specify either decimal or hexadecimal display.
Section 2-3