Direct Connection Numeral Editing - Omron NT-series Operation Manual

Numeral Editing
2-8-2

Direct Connection Numeral Editing

Creating
1, 2, 3... 1.
68
Numeral editing is not possible for PTs without Touch Panels is Expansion
I/O Units with 10/02 Terminals are used.
Use the following procedure to create a direct connection numeral editing
area.
Select NUM EDIT from the Initial Edit Display, a list of the numeral edit-
ing already existing in the current screen will be displayed.
2. Specify the number to be used in the table. This is not the numeral table
and the numbers do not correspond to item numbers in the numeral
table. When a number is specified, the numeral table will be displayed.
3. Specify the desired table entry number. The initial value input field (con-
tents) will be entered. The headings in the table are described in the
following table.
Section 2-8