Editing Screens - Omron NT-series Operation Manual

Editing Screens

1-10

Editing Screens

Screen Edit Operations
Item
Input string (STR Inputs character strings to be displayed on the screen and sets their display positions and
IN) the manner in which they are to be displayed. Character strings input in this way are treated
as fixed displays, and their displays cannot be changed while the Programmable Terminal is
operating.
Numeral display Sets numeric displays for the screen by designating the numeral table entry to be referenced
(NUM DISP) at the time of display, the display position, and the method of display.
String display (STR Sets character string displays for the screen by designating the string table entry to be
DISP) referenced at the time of display, the display position, and the method of display.
Lamps (LAMP) Sets lamps for the screen by designating the size/shape of lamp areas, numbers, and labels. 40
Touch switches Sets touch switches for the screen by designating the size of touch switch areas, numbers,
(TOUCH SW) and labels.
Bar graphs (BAR Sets bar graphs for the screen by designating the numeral table entry to use, the display
GRPH) positions/directions, and the method of display. The display of percentage calculations is
also set.
Table editing (TBL Edits numeral table and character string table contents, and is the same as the table editing
EDIT) operation entered from the Screen Selection Display.
Numeral editing Creates screens for numeric input via function keys, touch switches, or Expansion I/O Units
(NUM EDIT) (32/16 Terminals or Function Key Units (12 keys)) and designates the numeral table to which
the input will be written.
Graphic input Polylines (a broken line made up of one or more line segments) and circles can be created
(GRAPHIC) on screen.
Marks (MARK) Creates and modifies marks.
Edit (EDIT) Copies, moves, or deletes text or graphics on the screen.
If you select a screen number from the Screen Selection Display, the Initial
Edit Display will be displayed. If the NT20M has been selected with Tool Set-
tings, then the NT20M screen image display area will be shown in the rectan-
gular box at the top of the display. If the NT600M has been selected, then the
entire display becomes a display area and this box will not appear.
The following operations can be performed on the Edit Display.
Initial Edit Display
Function
Section 1-10
Page
22
28
34
46
51
59
62
71
82
87
11