Transmitting Data With Verification To A Prom Writer - Omron NT-series Operation Manual

Transmitting Data with Verification to a PROM Writer

7-3

Transmitting Data with Verification to a PROM Writer

1, 2, 3... 1.
5. The settings for transfer to the PROM writer will be displayed. Check
these settings before transferring the data.
6. After verifying that the PROM writer can receive the data, press the En-
ter Key. To cancel and return to step 1, press the Escape Key.
7. When the transmission is complete, a message will be displayed. Press
any key to return to the Screen Selection Display.
In this case, data created by the Support Tool is sent to a PROM writer by
file. After transmission is complete, the data is received back from the PROM
writer and checked to see whether it was transmitted correctly.
Go to the File Selection Display.
2. Move the bar cursor to the file you want to transmit with verification, and
then press F4 (ROM).
3. Select "Verify," and then press the Enter Key. A message will be dis-
played to verify that the designated file is correct.
4. After verifying the file name, press the Enter Key. A message will be dis-
played asking whether you actually want to transmit the data.
Section 7-3
119