Omron NT-series Operation Manual page 43

Character String Displays
value field is left, the following display will appear to input the remaining
settings.
6. Make the four settings as described in the following table. The comment
is optional and all four settings can be omitted here if desired and input
later using the table edit operation.
Heading
Initialize (Init)
Set words (St Word)
Word
Comment
The character string display settings will appear when the above display
is left.
7. Set the way in which the display will appear on the screen.
Press the Enter Key after completing all of these settings.
Meaning
Set YES to initialize the contents in the character
string table when PT power is turned ON. Set to
NO to maintain the previous value when PT power
is turned ON.
Set the number of PC words to be used.
Set the address of the first PC word to be used.
Input any desired user comment area
Section 2-3
39