Changing File Titles; Saving Pt Histories In Files - Omron NT-series Operation Manual

Saving PT Histories in Files

4-3

Changing File Titles

1, 2, 3... 1.
4-4

Saving PT Histories in Files

1, 2, 3... 1.
98
You can change file titles that are already set.
Go to the File Selection Display.
2. Move the bar cursor to the file for which the title is to be changed, and
press F9 (Change Title). An input field will appear for the new title.
3. Input the new title, and then press the Enter Key.
History information recorded in the PT can be received through the tool inter-
face and saved in a file. The file that you save is a text file, so you can check
its contents with the MS–DOS "TYPE" command. History files can also be
printed. Refer to Section 5 Printing for details.
Go to the File Selection Display.
2. Press F5 (History). It does not matter where the cursor is. An input field
will appear for the history file name.
Section 4-4