Table of Contents
Advertisement
Problem
The brightness inside
the oven varies.
Cooking is finished,
but the cooling fan is
still running.
Pressing the
START/+30s button
operates the oven.
Turntable
While turning, the
turntable comes out of
place or stops turning.
The turn table drags
while turning.
The turn table rattles
while turning and is
noisy.
Grill
Smoke comes out
during operation.
Oven
The oven does not
heat.
MC32J7055VB_TL_DE68-04319P-00_EN_150430-1.indd 139
Cause
Brightness changes depending on
power output changes according to
function.
To ventilate the oven, the cooling fan
continues to run for about 3 minutes
after cooking is complete.
This happens when the oven was not
operating.
There is no roller ring, or the roller
ring is not properly in place.
The roller ring is not properly in
place, there is too much food, or the
container is too large and touches
the inside of the microwave.
Food residue is stuck to the bottom
of the oven.
During initial operation, smoke may
come from the heating elements
when you first use the oven.
Food is on the heating elements.
Food is too close to the grill.
Food is not properly prepared and/or
arranged.
The door is open.
Action
Power output changes
during cooking are not
malfunctions. This is not an
oven malfunction.
This is not an oven
malfunction.
The microwave oven is
designed to operate by
pressing the START/+30s
button when it was not
operating.
Install the roller ring and
then try again.
Adjust the amount of food
and do not use containers
that are too large.
Remove any food residue
stuck to the bottom of the
oven.
This is not a malfunction,
and if you run the oven 2-3
times, it should stop.
Let the oven cool and then
remove the food from the
heating elements.
Put the food a suitable
distance away while cooking.
Make sure food is properly
prepared and arranged.
Close the door and try again.
English 139
2015-04-30
2:21:04
Advertisement
Table of Contents
