Using The Group Parameter To Set Up Customized Groups - Avaya 9608 Administrator's Manual

## alternatives.
## SET DSTSTART
##
## NOTE:
## The default DSTSTART and DSTSTOP parameters reflect the
## new 2007 Daylight Savings Time values for North America
##
## DSTSTOP sets the ending day for daylight savings time.
## See
## SET DSTSTOP
##
------------------------------

Using the GROUP parameter to set up customized groups

You might have different communities of users, all of which have the same deskphone model,
but which require different administered settings. For example, you might want to group users
by time zones or work activities.
Use the GROUP parameter for this purpose:
1. identify which deskphones are associated with which group, and designate a number for
each group. The number can be any integer from 0 to 999, with 0 as the default, meaning
your largest group is assigned as Group 0.
2. At each non-default deskphone, instruct the installer or user to invoke the GROUP Craft
Local procedure as specified in the Avaya one-X™ Deskphone SIP Installation and
Maintenance Guide for 9608, 9611G, 9621G, and 9641G Deskphones (Document Number
16-603604) and specify which GROUP number to use. The GROUP System value can only
be set on a phone-by-phone basis.
3. Once the GROUP assignments are in place, edit the settings file to allow each deskphone
of the appropriate group to download its proper settings.
Using the GROUP parameter to set up customized groups
"2SunMar2L"
for format and setting alternatives.
"1SunNov2L"
Issue 1 May 2011 79