Avaya 9608 Administrator's Manual page 96

Administering Telephone Options
Parameter Name
LANGUAGES
LLDP_ENABLED
LOCAL_DIAL_AREA
_CODE
LOCAL_LOG_LEVEL
LOG_CATEGORY
96 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
Default Description and Value Range
Value
" " (Null) List of links to language files to be downloaded.
Substrings are delimited by commas. Maximum
length is 1023 characters. Each substring shall
follow one of the these naming rules:
A substring is identical to a file name without any
prefix specifying the path or server: The files are
downloaded from the same source as the setting
file(s).
A substring can provide a prefix to the file name,
which specifies the relative path ("./" for next
higher directory level) from the directory the
settings file(s) has been downloaded to the
directory the language file shall be download.
A substring specifies the completed URL to the
language file including protocol identifier ("http://"
or "https://"), server and path.
2 Flag to enable/disable LLDP (Link Layer Discovery
Protocol). Valid values are:
0 = disabled; the deskphone will not support LLDP.
1 = enabled; the deskphone will support LLDP.
2 = auto; the deskphone will support LLDP, but the
transmission of LLDP frames will not begin until or
unless an LLDP frame is received.
0 Indicates whether user has to dial the area code
for calls within the same area code. Valid values
are:
0 = User does not need to dial local area code.
1 = User must dial the area code for local calls.
3 Numerical code of severity level. Store entries to
the local event log, if event occurs with a severity
level whose numerical code is equal to or less than
the LOCAL_LOG_LEVEL value. Values are: 0
(emergencies), 1 (alerts), 2 (critical), 3 (errors), 4
(warning), 5 (notice), 6 (informational), 7 (debug).
Comma-separated list of keywords in standard
string format representing logging categories
(software modules or functions to be included in
lower level logging). Logging implementation
blocks all traces at level "Warning" or lower, unless
the category corresponding to a given trace is
enabled. If the LOCAL_LOG_LEVEL is set to
"Warning" or lower, this parameter would enable
low-level traces from the adaptors or manager as
indicated. Applies to all logging mechanisms
(syslog and local log). Example: "ALSIP,
SESSION" enables debug level traces from the
ALSIP adaptor and Session manager.
14 of 30