Avaya 9608 Administrator's Manual page 131

PSTN_VM_NUM (PSTN access number for Voice Mail system) - This parameter specifies the
telephone number to be dialed automatically when the deskphone user presses the Messaging
button under a non-AST controller. The phone places a PSTN call out from the local office and
back in to the location that houses the voice mail server. Additional codes necessary to reach a
specific user's voice-mail box may also be included.
Example 1. SET PSTN_VM_NUM 96135550123
ENABLE_REMOVE_PSTN_ACCESS_PREFIX - When the phone is operating with a non-AST
controller and the value of the parameter is 0, the PSTN access prefix, defined by the parameter
PHNOL, is retained in the outgoing number. If the value is 1, then the PSTN access prefix is
stripped from the outgoing number.
PHNLAC - A string representing the phone's local area code. When set, this parameter
indicates the endpoint's local area code, which along with the parameter
LOCAL_DIAL_AREA_CODE, allows users to dial local numbers with more flexibility.
Example: SET PHNLAC 617
LOCAL_DIAL_AREA_CODE - A flag indicating whether the user must dial the area code for
calls within same area code regions. When the parameter is 0, the user does not need to dial
the area code; when this parameter is 1, the user needs to dial the area code. When this
parameter is enabled (1), the area code parameter (PHNLAC) should also be configured (i.e.,
not the empty string).
Example: SET LOCAL_DIAL_AREA_CODE 1
Example 1 - Setting the parameter configuration:
SET ENHDIALSTAT 2
SET PHNOL 27
SET PHNCC 1
SET PHNDPLENGTH 7
SET PHNLDLENGTH 11
SET PHNLD 0
SET PHNIC 001
Setting the dial plan on SIP Deskphones
Issue 1 May 2011 131