Avaya 9608 Administrator's Manual page 91

Parameter Name
ENABLE_PRESENCE
ENABLE_PPM_
SOURCED_
SIPPROXYSRVR
ENABLE_REDIAL
ENABLE_REDIAL_LIST
ENABLE_REMOVE_
PSTN_ACCESS_PREFIX
ENABLE_SERVER_
BASED_PRESENCE
ENABLE_SIP_USER_ID
Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Default
Value
0
1
1
1
0
1
0
Description and Value Range
Enable or disable complete Presence functionality.
If disabled, Presence icons do not show in
Contacts or Call History Lists, Presence is not
displayed to the user, incoming Presence updates
are ignored, and menu items of User Interface to
set Presence options are not displayed (if
available). Values are 0=disabled, off; 1=enabled,
on.
Enables PPM as a source of SIP proxy server
information. Valid values are:
0 = Do not use PPM as a source for SIP proxy
server information.
1 = Use PPM for SIP proxy server information.
Enable or disable complete Redial functionality. If
disabled pressing the redial button has no effect
and the redial softkeys and menu items are not
displayed. Values are 0=disabled; 1=enabled.
Enables or disables the capability to redial out of a
list of recently dialed numbers instead of
performing last number redial. Values are
0=disabled (last number redial only is offered to
the user); 1=enabled (user can select either last
number redial or redial from a list).
Enables the removal of the PSTN access prefix
from collected dial strings when the phone is
communicating with a non-AST controller.Valid
values are:
0 = PSTN access prefix digit is not removed;
1 = PSTN access prefix digit is removed from
collected digit string before formulating the INVITE
for delivery to the controller. (Enabling this
parameter when the phone is communicating with
an AST-capable controller has no effect).
Activates/deactivates server based presence. If
set to 1 (Enabled), a subscription to presence list
and watcher info is done. If set to 0 (Disabled),
individual presence subscriptions are done
separately to every contact (buddy) from the
contact list.
Activates/deactivates the User ID field on the
Login screen. Valid values are: 0=disabled;
1=enabled.
If set to 0, user does not see the User ID field on
the Login Screen. If set to 1, the user is prompted
for the User ID.
9 of 30
Issue 1 May 2011 91