Avaya 9608 Administrator's Manual page 76

Telephone Software and Application Files
values. You need only specify settings that vary from defaults, although specifying defaults is
harmless.
Any line which does not match one of the previous statement types is ignored and, therefore,
can be treated as a comment. By convention, in the upgrade and settings files distributed by
Avaya, any line intended to be ignored by the phone or read as a comment starts with "##".
Table 1: Settings File System Parameters That Can Be Tested in an IF Statement
Parameter
BOOTNAME
MACADDR
MODEL
MODEL4
PWBCC
GROUP
SIG
SIG_IN_USE
A sample settings file follows.
76 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
Description
Pre-6.0 software releases only. The name of the Signed Kernel/Root
Software package in the deskphone.
MAC address of the phone (hh:hh:hh:hh:hh:hh; automatically supplied by a
phone).
Telephone Model identifier (8 ASCII characters; automatically supplied by a
phone).
The first four digits of the model identifier (automatically supplied by a
phone).
Avaya identification number for the printed circuit board (automatically
supplied by a phone).
Group identifier (must be manually set on a phone)
Pre-6.0 software releases only. Signalling protocol identifier (2=SIP,
1=H.323, 0=default).
The signaling protocol in use. For SIP software value is always "SIP" and
cannot be changed. 6.0 and later software Releases only. Evaluate
configuration file(s) according to value of this parameter (IF...GOTO
command) and consider only commands related to the corresponding
section of configuration file(s). Default=2 (SIP).