Dhcp Generic Setup - Avaya 9608 Administrator's Manual

Server Administration
Parameter
PROCPSWD
PROCSTAT
SIG
SIP_CONTROLLER_LIST
SNTPSRVR
TLSDIR
TLSPORT
TLSSRVR
VLANTEST

DHCP Generic Setup

This section is limited to describing a generic administration that works with the 9600 Series SIP
IP Telephones. Three DHCP software alternatives are common to Windows operating systems:
Windows NT
●
Windows 2000
●
Windows 2003
●
Any other DHCP application might work. It is the responsibility of the customer to install and
configure the DHCP server correctly.
66 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
Description
Security string used to access local procedures. The default is 27238.
Controls whether local procedures are enabled. The default is 0
(enabled).
The signaling protocol download flag that indicates which protocol
applies (H.323 (1), SIP, (2) or Default (0). For software releases prior to
6.0, SIG can only be set manually on the telephone (not via DHCP or in
the 46xxsettings.txt file), and Default means the default protocol
supported at that location (a custom upgrade file is required to support
both protocols). For software releases 6.0 and later, separate upgrade
files with different names are used for H.323 and SIP, and Default
means to download the upgrade file for the same protocol that is
supported by the software that the telephone is currently using.
SIP proxy/registrar server IP or DNS address(es). (0 to 255 characters;
zero or one IP Address in dotted decimal or DNS name format,
separated by commas without any intervening spaces.) The default is
null.
List of SNTP server IP or DNS address(es) used to retrieve date and
time via SNTP
Used as path name that is prepended to all file names used in HTTPS
GET operations during initialization (0-127 character string).
Destination TCP port used for requests to https server (0-65535). The
default is 443.
IP Address(es) or DNS name(s) of Avaya file server(s) used to
download configuration files.
Note: Transport Layer Security is used to authenticate the server.
Number of seconds to wait for a DHCPOFFER on a non-zero VLAN.
The default is 60 seconds.
®
4.0 DHCP Server
®
DHCP Server
®
DHCP Server