Avaya 9608 Administrator's Manual page 107

Parameter Name
SIP_CONTROLLER_LIST
SIP_MODE
SIP_PORT_SECURE
Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Default
Value
" " (Null)
0
5061
Description and Value Range
List of SIP proxy/registrar server IP or DNS
address(es). Server(s) used to address SIP
registrations and signaling, if operating in proxy
mode (in case of several entries first address
always first, etc.).
When operating in an Avaya Environment
SIP_CONTROLLER_LIST is also used to access
Personal Profile Manager (PPM).
This parameter is considered the list of
"Configured Controllers" for Failover logic. When
this parameter has multiple IP Addresses, the
ordering of the list defines the priority of the
controllers for selection during Failover; the first
element of the list is the highest priority, the last
element is the lowest priority. For information on
Failover, see Chapter 10: System Failover and
Survivability.
Format: host[:port][;transport=xxx]
where host is an IP address in dotted decimal
format or DNS name, port is the optional port
number (if not specified, the default port value of
5060 for UDP and TCP or 5061 for TLS is used),
transport is the optional transport type (where xxx
is tls, tcp, or udp) and if not specified, the default
value of TLS is used. The first element of this
parameter (if applicable) has the highest
precedence within the parameter. This parameter
can have 0 to 255 characters indicating zero or
more IP addresses in dotted decimal or DNS
name format, separated by commas without any
intervening spaces. Note: Use TCP or TLS for any
Avaya proxies such as SM, SES, Secure Router,
B5800; do not use UDP for Avaya proxies.
SIP operational mode. Determines whether the
deskphone uses a proxy to receive incoming calls
or can receive calls directly from another
deskphone. Values are: 0=proxy mode; the phone
operates in proxy mode with SIP proxy/registrar,
1=peer-to-peer mode; the phone operates in
peer-to-peer mode between SIP endpoints.
The phone's listening port for inbound connections
(for secure message transfer via TLS). Values
range from 1024 - 65535.
25 of 30
Issue 1 May 2011 107