Hgns+ - Set Hunt Group Night Service (!); Hgns- - Clear Hunt Group Night Service; Hgos+ - Set Hunt Group Out Of Service; Hgos- - Clear Hunt Group Out Of Service - Avaya IP Office 5610 User Manual

Function Key Programming

HGNS+ - Set Hunt Group Night Service (!)

Put a specific hunt group into night service mode.
This function requires the hunt group number to be entered when programmed. The
hunt group number is then shown next to HGNS+. This function can be programmed
through the phone by the user using an
Pressing
night service fallback group if set or, if not answered, to voicemail.
[User | Digital Telephony | Advanced | Set | Set Hunt Group In Service]

HGNS- - Clear Hunt Group Night Service

Returns a hunt group that has been manually put into night service back to normal
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 43.
This function requires that the hunt group number is entered when programmed. This
function cannot be programmed through the phone by the user.
The hunt group number is shown next HGNS-. Pressing
back into normal service if in night service.
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Night Service]

HGOS+ - Set Hunt Group Out of Service

Put a specific hunt group out of service mode.
This function requires the hunt group number to be entered when programmed. The
hunt group number is then shown next to HGOS+. This function cannot be
programmed through the phone by the user.
Pressing
of service fallback group if set or, if not answered, to voicemail.
[User | Digital Telephony | Advanced | Set | Set Hunt Group Out Service]

HGOS- - Clear Hunt Group Out of Service

Returns a hunt group that has been manually put into out of service back to normal
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 43.
This function requires that the hunt group number is entered when programmed. This
function cannot be programmed through the phone by the user.
The hunt group number is shown next HGOS-. Pressing
back into normal service if in night service.
[User | Digital Telephony | Advanced | Call | Clear Hunt Group Out Of Service]

Hold - Hold Call

Place the current call on hold at the central office. This function is not supported in the
USA.
If no exchange slot number is specified when the function is programmed, central office
slot 0 is used.
Pressing
is not the same as local hold provided by the IP Office.
[User | Digital Telephony | Advanced | Hold | Hold Call]
See also:
• Rtriv - Retrieve Call on page 51.
IP Office 5610 User's Guide
40DHB0002USFG – Issue 1 (9th February 2005)
HGNS+ puts the hunt group into night service. Group calls then go to its
HGOS+ puts the hunt group out of service. Group calls then go to its out
Hold is only supported if the central office provides a Q.931 hold facility. It
Function Keys - Page 43
Admin key.
HGNS- puts the group
HGOS- puts the group
Function Keys - Page 43
Function Key Programming