Multiple Call Appearances - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
Local

3.1.21 Multiple Call Appearances

The phone supports multiple concurrent calls. The hold feature can be used to pause
activity on one call and switch to another call. The number of concurrent calls per line
key is configurable. Each registration can have more than one line key assigned to it
(refer to 3.1.20 Multiple Line Keys per Registration on page 41).
Central
(boot
server)
42
® ®
IP / SoundStation IP
Web Server Specify the number of line keys to assign per registration.
(if enabled) Navigate to:
http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ether-
net address>-phone.cfg on the boot server. They will per-
manently override global settings unless deleted through
the Reset Local Config menu selection.
Local Phone User Specify the number of line keys to assign per registration
Interface using the SIP Configuration menu. Either the Web Server
or the boot server configuration files or the local phone
user interface should be used to configure registrations,
not a mixture of these options. When the SIP Configura-
tion menu is used, it is assumed that all registrations use
the same server.
Configuration file: Specify the default number of calls that can be active or
sip.cfg on hold per line key.
•
Configuration file: Specify per-registration the number of calls that can be
phone1.cfg active or on hold per line key assigned to that registration.
This will override the default value specified in sip.cfg.
•
Copyright © 2006 Polycom, Inc.
For more information, refer to 4.6.1.12 Call Handling
Configuration <call/> on page 125.
For more information, refer to 4.6.2.1 Registration
<reg/> on page 149.
Features