Polycom SoundPoint IP 300 Administrator's Manual page 132

Administrator's Guide - SoundPoint IP / SoundStation
4.6.1.10.3 port <port/>
4.6.1.10.3.1 RTP <RTP/>
Attribute
tcpIpApp.port.rtp.filterByIp
tcpIpApp.port.rtp.filterByPort
tcpIpApp.port.rtp.forceSend
tcpIpApp.port.rtp.mediaPortRangeStart
124
®
IP
Permitted
Values
0, 1
0, 1
Null, 1024-
65534
Null, even
integer from
1024-65534
Copyright © 2006 Polycom, Inc.
Default Interpretation
1 If set to 1, reject RTP pack-
ets arriving from (sent from)
a non-negotiated (through
SDP) IP address.
0 If set to 1, reject RTP pack-
ets arriving from (sent from)
a non-negotiated (through
SDP) port.
Null When non-Null, send all
RTP packets to, and expect
all RTP packets to arrive on,
the specified port.
Note: both tcpI-
pApp.port.rtp.filterByIp and
tcpIpApp.port.rtp.filterBy-
Port must be enabled for this
to work.
Null If set to Null, the value 2222
will be used for the first allo-
cated RTP port, otherwise,
the specified port will be
used. Subsequent ports will
be allocated from a pool
starting with the specified
port plus two up to a value
of (start-port + 46), after
which the port number will
wrap back to the starting
value.
Optimization