Polycom SoundPoint IP 300 Administrator's Manual page 18

Administrator's Guide - SoundPoint
Name
Boot Server
Boot Server Option
Boot Server Option
Type
VLAN Discovery
VLAN ID Option
10
® ®
IP / SoundStation
Possible
Values
Option 66
Custom
Static
Custom+Opt.66
128 through 254
(Cannot be the
same as VLAN
ID Option)
IP Address
String
Disabled
Fixed
Custom
128 through 254
(Cannot be the
same as Boot
Server Option)
Copyright © 2006 Polycom, Inc.
IP
Description
Option 66: The phone will look for option number 66
(string type) in the response received from the DHCP
server. The DHCP server should send address informa-
tion in option 66 that matches one of the formats
described for Server Address in 2.2.1.3.3 Server Menu
on page 11. If the DHCP server sends nothing, then the
boot server address from flash will be used.
Custom: The phone will look for the option number
specified by the "Boot Server Option" parameter
(below), and the type specified by the "Boot Server
Option Type" parameter (below) in the response
received from the DHCP server. If the DHCP server
sends nothing, then the boot server address from flash
will be used.
Static: The phone will use the boot server configured
through the Server Menu. For more information, refer
to 2.2.1.3.3 Server Menu on page 11.
Custom+Opt.66: The phone will first use the custom
option if present or use Option 66 if the custom option
is not present. If the DHCP server sends nothing, then
the boot server address from flash will be used.
When the boot server parameter is set to Custom, this
parameter specifies the DHCP option number in which
the phone will look for its boot server.
When the Boot Server parameter is set to Custom, this
parameter specifies the type of the DHCP option in
which the phone will look for its boot server. The IP
Address must specify the boot server. The String must
match one of the formats described for Server Address
in 2.2.1.3.3 Server Menu on page 11
No VLAN discovery through DHCP.
Use predefined DHCP private option values of 128,
144, 157 and 191. If this is used, the VLAN ID Option
field will be ignored.
Use the number specified in the VLAN ID Option field
as the DHCP private option value.
The DHCP private option value (when VLAN Discov-
ery is set to Custom).
Installation and Operation