Miscellaneous Administrative Tasks; Adding A Background Logo - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
Verisign Class 4 Public Primary Certification Authority - G2
Verisign Class 4 Public Primary Certification Authority - G3
Verisign/RSA Commercial CA
Verisign/RSA Secure Server CA

6.2 Miscellaneous Administrative Tasks

6.2.1 Adding a Background Logo

This section provides instructions on how to add a background logo to all Sound-
®
Point IP phones in your organization. You must be running at least BootROM 2.x.x
and SIP 1.x.x. One bitmap file is required for each model, but SoundPoint
phones do not support bitmap logos.
Model
IP 300/301
IP 430
IP 500/501
IP 600/601
IP 4000
Logos smaller than described in the table above are acceptable, but larger logos may
be truncated or interfere with other areas of the user interface.
The SoundPoint
below. Any other colors will be approximated.
The SoundPoint
be rendered as either black or white.
Color
Black
Dark Gray
Light Gray
White
® ®
IP / SoundStation IP
Width
n/a
94
114
209
150
®
IP 500/501/600/601 phones only support the four colors listed
®
IP 4000 phone only supports black and white. Any other colors will
RGB Values
(Decimal)
0,0,0
96,96,96
160,160,160
255,255,255
Copyright © 2006 Polycom, Inc.
Height Color Depth
n/a n/a
23 monochrome
51 4-bit grayscale or monochrome
109 4-bit grayscale or monochrome
33 4-bit grayscale or monochrome
RGB Values
(Hexadecimal)
00,00,00
60,60,60
A0,A0,A0
FF,FF,FF
Appendix 1
®
IP 301
175