Polycom SoundPoint IP 300 Administrator's Manual page 135

Administrator's Guide - SoundPoint
Attribute
call.shared.oneTouchResume
call.shared.exposeAutoHolds
a. This feature is disabled on most call servers.
4.6.1.12.2 Hold, Local Reminder <hold/><localReminder/>
Attribute
call.hold.localReminder.enabled
call.hold.localReminder.period
call.hold.localReminder.startDelay
® ®
IP / SoundStation IP
Permitted
Values Default
0, 1 0
0, 1 0
Permitted
Values
0, 1
non-negative
integer
non-negative
integer
Copyright © 2006 Polycom, Inc.
Interpretation
Note: This parameter affects the
®
SoundStation IP 4000 phone only. For
other phones a quick press and release of
the line key will resume a call whereas
pressing and holding down the line key
will show a list of calls on that line.
If set to 1, when a shared line has a call
on hold the remote user can press that
line and resume the call. If more than one
call is on hold on the line then the first
one will be selected and resumed auto-
matically.
If set to 0, pressing the shared line will
bring up a list of the calls on that line and
the user can select which call the next
action should be applied to.
If set to 1, on a shared line, when setting
up a conference, a re-INVITE will be sent
to the server.
If set to 0, no re-INVITE will be sent to
the server.
Default Interpretation
0 If set to 1, periodically notify the
local user that calls have been on
hold for an extended period of
time.
60 Time in seconds between subse-
quent reminders.
90 Time in seconds to wait before
the initial reminder.
Optimization
127