Polycom SoundPoint IP 300 Administrator's Manual page 166

Administrator's Guide - SoundPoint IP / SoundStation
4.6.2.4.2 Routing <routing/>
This configuration section allows specific routing paths for outgoing SIP calls to be
configured independent of other 'default' configuration.
4.6.2.4.2.1 Server <server/>
Attribute
dialplan.x.rout-
ing.server.y.address
dialplan.x.rout-
ing.server.y.port
4.6.2.4.2.2 Emergency <emergency/>
In the following attributes, y is the index of the emergency entry description and z is
the index of the server associated with the emergency entry y. For each emergency
entry (index y), one or more server entry (indexes (y,z)) can be configured. y and z
must both follow single step increasing numbering starting at 1.
Attribute
dialplan.x.routing.emer-
gency.y.value
dialplan.x.routing.emer-
gency.y.server.z
158
®
IP
Permitted Values
dotted-decimal IP
address or host name
1 to 65535
Permitted Values
Comma separated list
of entries or single
entry representing a or
a combination of SIP
URL.
positive integer
Copyright © 2006 Polycom, Inc.
Default Interpretation
Null IP address or host name
and port of a SIP server
that will be used for
5060
routing calls. Multiple
servers can be listed
starting with y=1, 2, ...
for fault tolerance.
Default Interpretation
Null This represents the
URLs that should be
Example:
watched for emergency
"15,17,18",
routing.
"911", "sos".
When one of these
defined URL is detected
as being dialed by the
user, the call will be
automatically directed to
the defined emergency
server.
Null Index representing the
server defined in
4.6.2.4.2.1 Server
<server/> on page 158
that will be used for
emergency routing.
Optimization