Polycom SoundPoint IP 300 Administrator's Manual page 112

Administrator's Guide - SoundPoint IP / SoundStation
Instruction
branch (n)
a. Currently, patterns that use the sampled instruction are limited to the following format:
In the following table, x is the pattern number, y is the instruction number. Both x and
y need to be sequential. There are three categories of sound effect patterns: callProg
(call progress patterns), ringer and misc (miscellaneous).
Attribute
se.pat.callProg.x.name
se.pat.call-
Prog.x.inst.y.type
se.pat.call-
Prog.x.inst.y.value
se.pat.call-
Prog.x.inst.y.param
104
Meaning
Advance n instruc-
tions and execute
that instruction (n
must be negative and
must not branch
beyond the first
instruction)
sampled followed by optional silence and optional branch back to the beginning.
Permitted
Values
UTF-8
encoded
string
sampled
OR chord
OR silence
OR branch
integer
positive
integer
Copyright © 2006 Polycom, Inc.
®
IP
Example
se.pat.callProg.x.inst.y.type = "branch" (branch instruc-
tion type)
se.pat.callProg.x.inst.y.value = "-5" (step back 5 instruc-
tions and execute that instruction)
Interpretation
Used for identification purposes in the user interface (cur-
rently used for ringer patterns only); for patterns that use
a sampled audio file which has been overridden by a
downloaded replacement, the se.pat.ringer.x.name
parameter will be overridden in the user interface by the
file names of the wave file.
As above.
Instruction type: Interpretation:
sampled sampled audio file number
chord chord set number
silence silence duration in ms
branch number of instructions to advance
If instruction type is chord, this optional parameter speci-
fies the on duration to be used, overriding the on duration
specified in the chord-set definition.
Optimization