Microphone Mute; Multiple Line Keys Per Registration - Polycom SoundPoint IP 300 Administrator's Manual

Administrator's Guide - SoundPoint
configuration syntax is the same as that specified in 2.1.5 of RFC 3435. The phone
behavior when the user dials digits that do not match the digit map is configurable. It is
also possible to strip a trailing # from the digits sent.
Central
(boot
server)
Local

3.1.19 Microphone Mute

A microphone mute feature is provided. When activated, visual feedback is provided.
This is a local function and cannot be overridden by the network.

3.1.20 Multiple Line Keys per Registration

More than one line key can be allocated to a single registration (phone number or line).
The number of line keys allocated per registration is configurable.
Central
(boot
server)
® ®
IP / SoundStation IP
Configuration file: Specify impossible match behavior, trailing # behavior,
sip.cfg digit map matching strings, and time out value.
•
Configuration file: Specify per-registration impossible match behavior,
phone1.cfg trailing # behavior, digit map matching strings, and time
out values that override those in sip.cfg.
•
Web Server Specify impossible match behavior, trailing # behavior,
(if enabled) digit map matching strings, and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to
<Ethernet address>-phone.cfg on the boot server.
Changes will permanently override global settings unless
deleted through the Reset Local Config menu selection.
Local Phone User None.
Interface
Configuration file: Specify the number of line keys to assign per registration.
phone1.cfg
•
Copyright © 2006 Polycom, Inc.
For more information, refer to 4.6.1.2 Dial Plan
<dialplan/> on page 94.
For more information, refer to 4.6.2.4 Dial Plan
<dialplan/> on page 156.
For more information, refer to 4.6.2.1 Registration
<reg/> on page 149.
Features
41