Polycom SoundPoint IP 300 Administrator's Manual page 95

Soundstation ip sip
Hide thumbs Also See for SoundPoint IP 300:
Table of Contents

Advertisement

Administrator's Guide - SoundPoint
Attribute
voIpProt.server.x.transport
voIpProt.server.x.expires
voIpProt.server.x.expires.overlap
voIpProt.server.x.register
voIpProt.server.x.retryTimeOut
®
®
IP / SoundStation
IP
Permitted
Values
DNSnaptr or
TCPpreferred or
UDPonly or
TLS
positive integer,
minimum 300
positive integer,
minimum 5,
maximum
65535
0, 1
Null or
non-negative
integer
Copyright © 2006 Polycom, Inc.
Default
Interpretation
DNSna
If set to Null or DNSnaptr:
ptr
If voIpProt.server.x.address is
a hostname and voIp-
Prot.server.x.port is 0 or Null,
do NAPTR then SRV look-ups
to try to discover the transport,
ports and servers, as per RFC
3263. If voIp-
Prot.server.x.address is an IP
address, or a port is given, then
UDP is used.
If set to TCPpreferred:
TCP is the preferred transport,
UDP is used if TCP fails.
If set to UDPonly:
Only UDP will be used.
If set to TLS:
If TLS fails, transport fails.
Leave port field empty (will
default to 5061) or set to 5061.
Note: TLS is not supported on
®
SoundPoint
IP 300 and 500
phones.
3600
Requested registration period
a
in seconds
.
60
The number of seconds before
the expiration time returned by
server x at which the phone
should try to re-register. The
phone will try to re-register at
half the expiration time
returned by the server if that
value is less than the config-
ured overlap value.
1
If set to 0, calls can be routed to
an outbound proxy without reg-
istration.
0
If set to 0 or Null, use standard
RFC 3261 signaling retry
behavior. Otherwise retryTim-
eOut determines how often
retries will be sent.
Units = milliSeconds. (Finest
resolution = 100ms).
Optimization
87

Advertisement

Table of Contents
loading

Table of Contents