Polycom SoundPoint IP 300 Administrator's Manual page 54

Administrator's Guide - SoundPoint
tion. For more information, refer to 5.2.5 Bridged Line Appearance Signaling on
page 172.
Important
Emergency routing is not supported on shared lines (refer to 4.6.1.2.2.2 Emergency <emergency/> on
page 95).
Note
In the configuration files, bridged lines are configured by "shared line" parameters.
Central
(boot
server)
Local
46
® ®
IP / SoundStation IP
Configuration file: Specify whether diversion should be disabled on shared
sip.cfg lines.
•
Configuration file: Specify per-registration line type (private or shared) and
phone1.cfg the shared line third party name. A shared line will sub-
scribe to a server providing call state information.
•
Specify per-registration whether diversion should be dis-
abled on shared lines.
•
Web Server Specify per-registration line type (private or shared) and
(if enabled) third party name, and whether diversion should be dis-
abled on shared lines. Navigate to:
http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ether-
net address>-phone.cfg on the boot server. They will per-
manently override global settings unless deleted through
the Reset Local Confide menu selection.
Local Phone User Specify per-registration line type (private or shared) and
Interface the shared line third party name using the SIP Configura-
tion menu. Either the Web Server or the boot server con-
figuration files or the local phone user interface should be
used to configure registrations, not a mixture of these
options. When the SIP Configuration menu is used, it is
assumed that all registrations use the same server.
Copyright © 2006 Polycom, Inc.
For more information, refer to 4.6.1.12 Call Handling
Configuration <call/> on page 125.
For more information, refer to 4.6.2.1 Registration
<reg/> on page 149.
For more information, refer to 4.6.2.3 Diversion
<divert/> on page 154.
Features