Polycom SoundPoint IP 300 Administrator's Manual page 128

Administrator's Guide - SoundPoint IP / SoundStation
Attribute
qos.ip.rtp.max_throughput
qos.ip.rtp.max_reliability
qos.ip.rtp.min_cost
qos.ip.rtp.precedence
4.6.1.9.2.2 Call Control <CallControl/>
These parameters apply to call control packets, such as the network protocol signaling.
Attribute
qos.ip.callControl.dscp
qos.ip.callControl.min_delay
qos.ip.callControl.max_throughput
qos.ip.callControl.max_reliability
qos.ip.callControl.min_cost
120
®
IP
Permitted
Values
0, 1
0, 1
0, 1
0-7
Permitted
Values
0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
AF22,AF23,
AF31,AF32,
AF33,AF41,
AF42,AF43
0, 1
0, 1
0, 1
0, 1
Copyright © 2006 Polycom, Inc.
Default Interpretation
1 If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don't set it.
5 If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don't set them.
Default Interpretation
Null The differentiated services
codepoints of packets.
If set to null, the values below
of min_delay, max_throughput,
max_reliability, min_cost, and
precedence are used. Other-
wise, these values are overrid-
den.
1 If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don't set it.
Optimization