Microphone Mute; Soft Key Activated User Interface - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Note
Central Configuration file:
sip.cfg
(provisioning
server)
Configuration file:
phone1.cfg
Local Web Server
(if enabled)

Microphone Mute

Soft Key Activated User Interface

4 - 14
the introduction of "R" to the digit map). It is also possible to direct the
protocol used to place a call (with the introduction of "S" and "H" to the digit
map).
For more information digit maps, refer to "Technical Bulletin 11572: Changes
to Local Digit Maps on SoundPoint IP / SoundStation IP / VVX Phones" at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html .
Digit maps do not apply to on-hook dialing. The parameter settings described in
Dial Plan <dialplan/> on page
Configuration changes can be performed centrally at the provisioning server
or locally:
Specify impossible match behavior, trailing # behavior, digit map
matching strings, and time out value.
• For more information, refer to
Specify per-registration impossible match behavior, trailing #
behavior, digit map matching strings, and time out values that
override those in sip.cfg.
• For more information, refer to
A-145.
Specify impossible match behavior, trailing # behavior, digit map
matching strings, and time out value.
Navigate to: http://<phoneIPAddress>/appConf.htm#ls
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the provisioning server. Changes will
permanently override global settings unless deleted through the
Reset Local Config menu selection and the <Ethernet
address>-phone.cfg is removed from the provisioning server.
A microphone mute feature is provided. When activated, visual feedback is
provided. This is a local function and cannot be overridden by the network.
There are no related configuration changes.
The user interface makes extensive use of intuitive, context-sensitive soft key
menus. The soft key function is shown above the key on the graphic display.
A-23 are ignored during on-hook dialing.
Dial Plan <dialplan/>
Dial Plan <dialplan/>
on page A-23.
on page