Switch Membrane - Toshiba PORTEGE M300 Maintenance Manual

Hide thumbs Also See for PORTEGE M300:

Table of Contents

4.7 Switch membrane

Removing the switch membrane

To remove the switch membrane, follow the steps below and refer to figures 4-13.

1. Remove the following screw and remove the switch cover.

2. Disconnect the switch membrane from the connector CN3270 on the system board.

3. Remove the following screws and remove the switch membrane.

S-THIN FLAT BIND screw

M2.0x3.0S S-THIN FLAT BIND

Switch membrane

Figure 4-13 Removing the switch membrane

4 Replacement Procedures

Switch cover

S-THIN FLAT BIND

PORTEGE M300 Maintenance Manual (960-504)

Table of Contents