Toshiba PORTEGE M300 Maintenance Manual page 290

4.27 LCD unit/ FL inverter
5. Connect the LCD harness and the HV cable to the FL inverter.
CAUTION: The FL inverter once removed from the computer is not reusable. When
installing the FL inverter, use always a new one.
6. Place the FL inverter on the display cover with double-sided tape.
NOTE: (1) Install the FL inverter to set the edge of LCD harness connector in the
position of rib on the LCD cover.
(2) Make sure the harness is not stretched after connecting.
7. Bend the insulator in order (2→1) and stick the insulator 1 on the FL inverter.
4-62
LCD harness
4 Replacement Procedures
Rib on the LCD cover
PORTEGE M300 Maintenance Manual (960-504)