Microphone - Toshiba PORTEGE M300 Maintenance Manual

4 Replacement Procedures
4.17

Microphone

Removing the microphone
To remove the microphone, follow the steps below and refer to figure 4-29.
1. Disconnect the microphone cable from the connector CN6050 on the system board.
2. Remove the microphone from the system board.
Installing the microphone
To install the microphone, follow the steps below and refer to figure 4-29.
1. Insert the edge of the microphone into the hole of system board.
2. Pull the edge of microphone from the back of the system board and secure it to the
system board.
3. Connect the microphone cable to the connector CN6050 on the system board.
PORTEGE M300 Maintenance Manual (960-504)
Figure 4-29 Removing the microphone

4.17 Microphone

Microphone
CN6050
4-43