4.12 Touch Pad
4.12 Touch Pad
Removing the Touch Pad
To remove the touch pad, follow the steps below and refer to figures 4-23 and 4-24.
1. Peel off the adhered portion of cover sheet and remove the cover sheet from the
cover assembly.
Adhered portion
2. Remove the pad cover while releasing the latches.
3. Remove the following screws securing the touch pad.
M2.0x3.0S
4. Remove the touch pad while peeling off the adhered portion from cover assembly.
4-36
Figure 4-23 Peeling off the cover sheet
S-THIN FLAT BIND screw
4 Replacement Procedures
Cover sheet
×2
PORTEGE M300 Maintenance Manual (960-504)